Add.: No.266 Tianshan Street, Shijiazhuang, Hebei, China
Tel.: +86-311-68058636
Fax: +86-311-68058637
Contact Person: Paul Zhao

Home » Products »
    1. HAD Slurry Pump (For Heavy Duty Abrasive Slurry)

      Size: 1-32 inch
      Flow rate: 25 -13860 m3 /h
      Head: 5-100m
      Materials: Cr27, Cr28 and materials for rubber liner,CD4MCU, 2205
      Sealing method: Packing seal, vice-impeller seal and mechanical seal

    1. WAD Slurry Pump (For Low Abrasive Slurry)Size: 1-30 inches
      Flow rate: 25 -13860 m3 /h
      Head: 5-60m
      Materials: Cr27, Cr28 and materials for rubber liner
    1. VSD Slurry Pump (Vertical Sump Pump)Size: 1.5-12 inches
      Flow rate: 17 -1267 m3/h
      Head: 4-40m
      Materials: Cr27,Cr28, rubber lining
    1. DGD Slurry Pump (Dredge Pump for Sand and Gravel)Size: 4-16 inches
      Flow rate: 36-5040 m3/h
      Head: 5-80m
      Materials: Cr27,Cr28
      The DGD slurry pump, also named gravel pump, is a horizontal centrifugal slurry pump which has a single casing.
    1. OHD Slurry Pump (Oil Lubrication High Head Pump)Size: 2.5-12 inches
      Flow rate: 50 -1800 m3/h
      Head: 25-90m
      Materials: Cr27,Cr28
      OHD slurry pump we manufactured enjoys a horizontal single-stage single-suction structure, suitable for the electric power industrial and working conditions.
    1. MSD Slurry Pump (Multi Stage Pump)This slurry handling equipment is quite suitable to transport abrasive or corrosive liquid that contains fine solid particles such as ash, ore, coal and gravel.
      Our company has developed this MSD multi-stage slurry pump, a horizontal single-case multi-stage centrifugal pump.
    1. SSD Slurry Pump (Submersible Centrifugal Pump)Diameter of outlet: 50~300mm
      Flow rate: 40~1000m3/h
      Head of a single stage: 15-60m
      We have provided this SSD submersible slurry pump , vertical single-stage slurry pump that is featured with motor and pump which are co-axial, advanced structure.
    1. VFD Slurry Pump (Vertical Froth Pump)

      Size: 2-8 inches
      Flow rate: 7-570m3/h
      Head : 5-25m
      Materials: Cr27,Cr28 ,CD-4MCu and rubber
      It has been widely used to convey corrosive or abrasive slurries that contain froth in the metallurgical, mining, coal chemical.

    1. Spare Parts for Slurry PumpsWe supply OEM spare parts for slurry pumps, including impeller, expeller, throatbush, shaft sleeve, volute liner, and so on. These parts will totally match with old slurry pumps.
    1. API610 OH1 Pump (Foot Mount Pump)This API610 OH1 pump, designed based on the API610 pump, is a single-stage cantilever pump that is installed according to its center line.
      Size : 1-16 inches
      Materials: Cast steel, 304 stainless steel, 316 stainless steel, 316 stainless steel alloy, stainless steel 316L, CD4MCu, titanium, titanium alloy and Hastelloy.
    1. API610 OH2 Pump (Centerline Mounted Pump)

      Size: 1-16 inches
      Flow rate: 0 -2600 m3 /h
      Head : 0-300m
      This API610 OH2 Pump is a single stage volute pump that is designed with a horizontal radial split structure.

    1. API610 OH3 Pump (Vertical Centrifugal Pump)Flow rate: 3 -600 m3 /h
      Head : 4-120m
      Working pressure: 0-2.5Mpa
      The casing of this API610 pump adopts a radial split structure.
    1. API610 OH4 Pump (Rigid Coupled Pump)Size: 1-12 inches
      Flow rate : 2.5 -1500 m3 /h
      Head : 5-200m
      The API610 OH4 Pump is a single-stage single-suction centrifugal pump which, of easy-dismantling design.
    1. API610 OH5 Pump (Close Coupled Pump)Size : 1.5-8 inches
      Flow rate : 3-600 m3 /h
      Head : 4-120m
      This API610 OH5 pump is a vertical close-coupled pumping unit which is designed with a single-sage cantilevered structure.
    1. API610 BB1 Pump (Double Vortex Pump)Size: 3.14-31.4 inch
      Flow rate: ≤ 11600m3/h
      Head: < 240m
      This API610 BB1 pump is a quality pumping unit manufactured strictly according to the API610 standard.
    1. API610 BB2 Pump (Double Suction Centrifugal Pump)Size : 1.5-10 inches
      Flow rate: 2.5-600m3/h
      Head : 30-300m
      This API610 BB2 pump is a single-stage centrifugal pump which is designed with a double-supporting structure.
    1. API610 BB3 Pump (Axially Split Multistage Pump)Size : 1-20 inches
      Flow rate: 25 -800 m3 /h
      Head: 200-1050m
      Its large-caliber design could effectively lower the flow rate and reduce operation noise of the pump, enabling the pump to endure greater loads.
    1. API610 BB4 Pump (Radial Split Multistage Pump)Flow rate: 100~580m3/h
      Head : 740m~2150m
      Temperature : 0-210 °C
      This API610 BB4 pump is a multi-stage centrifugal pump which adopts an one-piece housing.
    1. API610 BB5 Pump (Double Casing Radial Split Pump)

      Flow rate : 0 – 850m3 /h
      Head : 600 – 2450m
      Materials: Cast iron, SS304, SS316, SS316Ti, SS316L, CD4MCU
      Manufactured strictly according to the API610 standard, this multi-stage centrifugal pump, equipped with a guide vane.

    1. API610 VS1 Pump (Vertical Centrifugal Pump)Size : 4-32 inches
      Flow rate : 100-10000m3 /h
      Head : 0-200m
      This vertical single-stage(double-stage) centrifugal mixed-flow pump enjoys excellent quality and highly reliable performance.
    1. API610 VS4 Pump (Abrasive Liquid Pump)Flow rate : 2~ 400 m3 /h
      Head : 5~100m
      Working temperature: -20°C~+ 120°C
      This API610 VS4 pump is a vertical single-stage single suction centrifugal fluid pump which is equipped with closed impellers.
    1. API610 VS5 Pump (Vertical Cantilever Sump Pump)Size : 1.5-8 inches
      Flow rate: 5 -400 m3 /h
      Head: 2.5-110m
      This API610 VS5 pump is a single-stage cantilever submerged pump which, of a vertical structure.
    1. API610 VS6 Pump (Multistage Centrifugal Pump)Nominal Diameter (DN) : 40-200mm
      Flow rate (Q): 0~ 800 m3/h
      Head (H): 0~800m
      The API610 VS6 pump is a multi-stage cantilever pump which, of a radial split structure, is designed with a double-layer housing.
    1. MZF Magnetic Drive Pump (Single Stage Pump)

      Size : DN25~DN200
      Flow rate : 1~900m3/h
      Head : ~200m
      Materials : Cast iron, cast steel, stainless steel alloys, titanium and titanium alloys
      This MZF magnetic drive pump provided by DAMEI is a reliable single-stage single-suction cantilever magnetic drive pump.

    1. MCM Magnetic Drive Pump (Low Flow High Head Pump)Caliber : DN20-DN40
      Flow rate: 0.5~35m3/h
      Head : 0~300m
      This MCM Magnetic Drive Pump made by our company is a single-stage single-suction cantilever magnetic drive pump.
    1. MMC Magnetic Drive Pump (Multistage Pump)Size: DN20~DN40
      Flow rate : 5~200m3/h
      Head : 0~1200m
      This MMC magnetic drive pump we provide to you is a multi-stage single-suction cantilever magnetic drive pump.
    1. MCD Magnetic Drive Pump (Vertical Pump)Size : DN25~DN50
      Flow rate: 1~60m3/h
      Head : 100m
      This MCD magnetic drive pump is a single-stage single suction magnetic driven pump of a vertical structure.
    1. Submersible Sewage Pump

      Size : 1-30 inches
      Flow rate: 25 -13860 m3/h
      Head : 5-60m
      This non-clog centrifugal pump is equipped with quality impellers which are highly matched with the pump casing.

    1. Non-Clog Sewage PumpSize : 1.5-20 inches
      Flow rate: 2-5500 m3/h
      Head: 5-100m
      This KWP non-clog pump is a reliable centrifugal pumping unit for sewage conveyance.
      Of a horizontal structure, this single stage centrifugal pump adopts the axial suction.
    1. Knife Gate Valve (Rising Stem Type)

      As a reliable supplier of pumping equipment, DAMEI has provided to customers rich types of reliable pumps. To ensure smooth and continuous operation of each pump, we provide various quality pump parts to customers. This knife gate valve with rising stem is a most common used pump accessory and there are rich subtypes available for users.

    1. Knife Gate Valve (Non-Rising Stem Type)This manual knife gate valve is a newly developed gate valve that enjoys reliable performance, smaller size and light weight. It is an ideal device for the conveyance of sewage, coal slurry, syrup, slag slurry, mud, air and water and has been widely used in the water supply, paper and pulp making and mining industries.
    1. Slide Gate ValveThe slide gate valve we provide to you is a key control device to control the flow rate or convey capacity of pumps when they are handling powder, grain materials, granule and material of small particles (DN ≤ 50mm). It has been applied in flow rate control of a wide range