Home » Products » Magnetic Drive Pump » MCM Magnetic Drive Pump (Low Flow High Head Pump)
inquiry form

MCM Magnetic Drive Pump (Low Flow High Head Pump)

Caliber : DN20-DN40
Flow rate: 0.5~35m3/h
Head : 0~300m
Temp. : Small higher than 120°C
Pressure : 2.5MPa
Power: 0~55kW
Materials: Cast steel, stainless steel, Hastelloy, titanium, titanium alloy, etc.

This MCM Magnetic Drive Pump made by our company is a single-stage single-suction cantilever magnetic drive pump. Its magnetic coupling and sliding bearings are cooled and lubricated by the circulating media within the pump. This inner circulation contains a high-pressure circulation and a low-pressure circulation. To be more specific, the former is suitable for the conveyance of media that easily gets evaporated and the latter suitable of other medias. Generally speaking, this centrifugal pump is a low flow rate and high head industrial pump.

Meanwhile, its motor shaft and outside magnetic cylinder are connected directly. Therefore, this single-stage single suction centrifugal pump enjoys a laconic structure and lower cost. Rolling bearing and coupling are not necessary for this magnetic drive pump nor is the correction of concentricity.

Application of MCM Magnetic Drive Pump
This industrial cantilever pump is suitable to convey corrosive, noxious, combustible, explosive or valuable media or media that easily get evaporated. It has been widely applied in the chemical, petrochemical, coal chemical, pharmaceutical, paper making and textile industrials, as well as water treatment plants and nuclear power plants.

Inquiry Form